Shanghai Mei Jie Metal Products Co., Ltd
Contact: Mr. Si
Address: No. 318, Nanle Road,
Songjiang District, Shanghai
Tel: 86-21-50821306 68315169
Fax : 86-21-50825716
. Requirements for installation and use of fire shutter doors:
1, the installation of the shutter door of the upper part of the mouth shall not be equipped with ventilation pipes,
2, the shutter door installed, the installation of the ceiling, ceiling edge should be 50mm from the curtain to avoid friction;
3, commissioning and use, is strictly prohibited at the bottom of the station. Electrical facilities shall not be removed;
4, according to the provisions of the fire management quarterly in the routine fire safety inspection must not be missed to start the motor chain lubricants, which is a lot of property units, or fire units in the inspection omission of an important part.
In addition, regular fire inspection is also a major part of the daily use of fire shutter doors. Fire inspection at least once every three months, check the electrical, mechanical properties, and must not forget to check the start of the motor chain lubricants. During the inspection process, if any abnormality is found, take emergency measures immediately, cut off the input power, and then perform the troubleshooting work.
When the fire will occur, we can not expect, and therefore must ensure that the fire shutter doors are always in a normal state, and install the person responsible for the use and care, for proper operation and maintenance, in order to make the fire shutter doors really play its role.